My Cyclone won't start [Archive] - Buell Forums: Buell Motorcycle Forum

: My Cyclone won't start


Justin
06-17-2010, 03:57 PM
I was parking my bike yesterday and let go of the clutch before I had my bike in neutral. The engine stalled out and when I tried starting it up again I get nothing. No clicking, no sound, no nothing when I press the electric starter. There was a constant stream of smoke coming from the engine after it stalled. Could it be the starter, spark plugs, wiring...? I imaging it is something electrical.

Any advise helps.

Thanks,

Justin
2000 Buell M2 Cyclone

wseaver5001
07-25-2011, 10:11 PM
Check you battery voltage if its good i'd try bypassing the kick stand switch.

Justin
10-28-2011, 04:58 PM
Thanks for the good advice wseaver5001. Turns out my bike wouldn't start because it was still in first gear, my bike only starts in neutral, and the smoke was coming from some oil leaking onto my engine. Everything is working fine now. xD